Barclay Butera for Lexington: Montecito and Coastal California
The Barclay Butera collections at Sutter & Vale draw on coastal California living: clean lines, warm wood veneers, marble surfaces, and hardware that bridges traditional motifs with contemporary finishes. The range spans bedroom, dining, and living furniture designed for homes that want ease without sacrificing craft. Browse the full offering at Barclay Butera.
What Design Sensibility Runs Through These Pieces?
A consistent vocabulary connects every piece in the collection. Surfaces rely on natural material contrast: White Ash Burl veneer laid in parquet patterns, Carrara marble tops exposed at stepped edges, and metal banding used as perimeter trim and visual detail. The Wilshire finish, a warm mid-tone brown, anchors the wood pieces and keeps the palette grounded rather than stark.
Hardware does real work here. Pan-Asian pulls in black nickel, mitered corner details, and recessed plinth bases appear across categories, giving the collection a coherent look whether you are furnishing one room or several.
How Do the Living Room Tables Work Together?
The cocktail and lamp tables share a step-down edge detail that exposes the material beneath the top. Two material directions let you choose:
- Marble: The Doheny Rectangular Cocktail Table and Doheny Lamp Table use a white veneered Carrara marble top. The step-down on each end puts the marble's edge in full view against the Wilshire base.
- Wood: The Essex Rectangular Cocktail Table and Essex Lamp Table replace marble with White Ash Burl parquet. Legs are mitered at the corners so the step-down reads as one continuous surface.
Placing marble on the cocktail table and wood on the side tables creates surface contrast without conflict, because the base finish and profile are shared across the Doheny and Essex pieces.
What Should You Know About the Dining Pieces?
The dining chairs and sideboard bring a range of references into one room without competing with each other.
The Schuler Upholstered Side Chair and Schuler Upholstered Arm Chair interpret the traditional balloon-back silhouette in a transitional way: the back is softened and upholstered, the frame stays clean. For a standard dining table, plan on 18 inches of seat height and at least 24 inches of width per place setting. Arm chairs at the table heads and side chairs along the flanks is a common arrangement.
The Fairfax Sideboard serves as the room's anchor. Six felt-lined drawers handle flatware, linens, and serving tools. The X-shape base finished in black nickel stainless keeps the piece from reading heavy. The Pan-Asian pull motif on the drawers carries the same black nickel detail through from top to base.
How Does the Bedroom Program Come Together?
The Post Ranch Panel Bed is built around a mitered veneer pattern on the headboard, with decorative metal spacers that give the panel the appearance of floating inside a perimeter frame trimmed in metal banding. The recessed plinth base keeps the profile low and horizontal, which suits rooms with generous ceiling height. If you prefer to work with your own frame, the Post Ranch Headboard offers the same headboard detail and pairs with a separate metal frame.
The Highwood Rectangular Mirror can hang vertically or horizontally, giving it flexibility over a dresser or sideboard. Its face frame carries the same White Ash Burl parquet pattern found on the Essex tables, so placing it alongside those occasional pieces creates a thread of material continuity through the room.
Frequently Asked Questions
Can I use the Doheny and Essex tables in the same room?
Yes. The two families share the Wilshire base finish and the step-down edge detail, so they read as a related group even though one uses marble and the other uses wood veneer. The contrast in surface material adds visual interest without creating a mismatch.
Is the Post Ranch Headboard compatible with a standard bed frame?
The headboard requires a separate metal frame for proper support. Check the product page for the specific frame item number before ordering to make sure you have everything you need.
How do I decide between side chairs and arm chairs for a dining table?
A common approach is to place arm chairs at the table ends and side chairs along the long sides. For smaller tables seating four, all side chairs tend to leave more elbow room; for tables seating six or more, arm chairs at the heads provide a natural visual anchor.
The Sutter & Vale Team
